| Thông số | Giá trị |
|---|---|
| Model | KV-N60ATP |
| Power voltage | 100 to 240 VAC (+10%/-15%) |
| Operating ambient temperature | 0 to 55°C (32 to 131°F) (no freezing) |
| Operating ambient humidity | 5 to 95% RH (no condensation) |
| Operating environment | As little dust and corrosive gas as possible |
| Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (IEC standard compliant) |
| Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals |
| Insulation resistance | 50 MΩ or more (500 VDC megger used for measurements) |
| Output power supply voltage | 24 VDC (±10%; output capacity: 0.6 A) |
| Storage temperature | −25 to +75°C (−13 to +167°F) |
| Vibration resistance – Intermittent vibration (5 to 9 Hz) | Amplitude: 3.5 mm (0.14″) |
| Vibration resistance – Intermittent vibration (9 to 150 Hz) | Acceleration: 9.8 m/s² (32.2’/s²) |
| Vibration resistance – Continuous vibration (5 to 9 Hz) | Amplitude: 1.75 mm (0.07″) |
| Vibration resistance – Continuous vibration (9 to 150 Hz) | Acceleration: 4.9 m/s² (16.1’/s²) |
| Shock resistance | Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each direction |
| Operating altitude | 2000 m (6561.7′) |
| Overvoltage category | AC: II, DC: I |
| Pollution degree | 2 |
| Calculation control method | Program storage method |
| Program language | Expanded ladder, KV Script, mnemonic |
| Number of instructions | 335 types and 690 instructions |
| Instruction execution speed | Basic instruction: 50 ns, Application instruction: 170 ns |
| Program capacity | 16k steps |
| Maximum number of attachable I/O units | 8 |
| Maximum number of I/O points | 256 (excluding the base unit I/O) |
| Input relay/Output relay/Internal auxiliary relay | Total of 9600 points 1 bit (R000 to R59915) |
| Link relay | 8192 points 1 bit (B0 to B1FFF) |
| Internal auxiliary relay | 9600 points 1 bit (MR000 to MR59915) |
| Latch relay | 3200 points 1 bit (LR000 to LR19915) |
| Control relay | 1440 points 1 bit (CR000 to CR8915) |
| Timer | 512 points 32 bit (T0 to T511) |
| Counter | 256 points 32 bit (C0 to C255) |
| Data memory | 32768 points 16 bit (DM0 to DM32767) |
| Link register | 16384 points 16 bit (W0 to W3FFF) |
| Temporary memory | 512 points 16 bit (TM0 to TM511) |
| High-speed counter | 4 points (CTH0 to CTH3), 32-bit automatic reset counter |
| High-speed counter comparator | 8 points (CTC0 to CTC7), 32 bits, two points per high-speed counter |
| Index register | 12 points 32 bit (Z01 to Z12) |
| Control memory | 9000 points 16 bit (CM0 to CM8999) |
| Positioning pulse output | 4 axes, Maximum output frequency: 100 kHz |
| Base unit I/O | Input: 36 points, output: 24 points |
| Number of comments and labels that can be stored in the main unit | Device comment: 20000, Label: 28000 |
| Power off hold function | Program memory: Flash ROM (10000 times rewrite), Device: Nonvolatile RAM |
| Self-diagnosis function | CPU error, RAM error, and other problems |
| Relay number | General input: R000 to R007, High-speed input: R008 to R015 |
| Input mode | 24 VDC input (open collector) |
| Maximum input voltage | 26.4 VDC |
| Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed input: 6.5 mA) |
| Minimum ON voltage | 19 VDC |
| Maximum OFF current | 1.5 mA |
| Common method | General input: All points/1 common, High-speed input: Shared common |
| Circuit delay time | General input: OFF to ON max. 50 µs, High-speed input: OFF to ON max. 2 μs |
| Relay number | General output: R508 to R607 (16 points) |
| Output mode | MOSFET (P-ch) |
| Rated load | 30 VDC, 0.5 A |
| Maximum OFF voltage | 30 VDC |
| Leakage current at OFF | 100 μA or less |
| Residual voltage at ON | 0.8 VDC or less |
| Common method | 8 to 10 points/1 common |
| ON/OFF response time | General output: OFF to ON: 100 μs, High-speed output: OFF to ON: 2 μs |
| Overcurrent protection | Protection provided for each common |
| Output frequency | High-speed output: 100 kHz |
| Built-in serial port | RS-232C, Modular connector |
| Transmission specifications | Baud rate: 1200 to 115200 bps |
| Data format | Start bit: 1 bit, Data bits: 7/8 bits, Stop bits: 1/2 bits |
| Error detection | Parity: Even, odd, none |
| Transmission distance | 15 m (49.2′) |
| Number of transmission units | 1 |
| Indication | SD (green), RD (red) |
| Internal current consumption | 85 VA |
| External dimensions (W x H x D) | 72 x 90 x 90 mm (2.83 x 3.54 x 3.54 inches) |
| Weight | Approx. 360 g (0.79 lb.) |
PLC Keyence KV-N60ATP (36 in/24 out transistor)
SKU: KV-N60ATP
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
5.900.000 ₫
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
PLC Keyence
-
Module truyền thông Keyence KV-XD02
-
Module Keyence KV-NC8ER (8 ngõ ra relay)
4.200.000 ₫ -
Module Keyence KV-NC32EX (32 ngõ vào)
3.700.000 ₫ -
PLC Keyence KV-40DR (24 in/ 16 out relay)
7.500.000 ₫ -
PLC Keyence KV-40ATP (26 in/ 14 out transistor)
7.500.000 ₫ -
Module Ethernet Keyence KV-LE20V
4.900.000 ₫ -
Module truyền thông Keyence KV-L20
3.800.000 ₫ -
Module Keyence KV-E16X (16 ngõ vào)
1.900.000 ₫ -
PLC Keyence KV-7500
9.700.000 ₫ -
Module nhiệt độ Keyence KV-TF40
1.900.000 ₫