PLC Keyence KV-N40DR (24 in/ 16 out relay)

SKU: KV-N40DR
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng

5.500.000 

Báo giá
SKU: KV-N40DR Danh mục: Thương hiệu:
Thông sốGiá trị
ModelKV-N40DR
Power voltage24 VDC (+10%/-15%)
Operating ambient temperature0 to 55°C (32 to 131°F) (no freezing)
Operating ambient humidity5 to 95% RH (no condensation)
Operating environmentAs little dust and corrosive gas as possible
Noise immunity1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
Withstand voltage1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
Insulation resistance50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
Storage temperature−25 to +75°C (−13 to +167°F)
Intermittent vibration – Frequency: 5 to 9 HzAmplitude: 3.5 mm (0.14″)
Intermittent vibration – Frequency: 9 to 150 HzAcceleration: 9.8 m/s² (32.2’/s²)
Continuous vibration – Frequency: 5 to 9 HzAmplitude: 1.75 mm (0.07″)
Continuous vibration – Frequency: 9 to 150 HzAcceleration: 4.9 m/s² (16.1’/s²)
Shock resistanceAcceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each of the X, Y, and Z directions
Operating altitude2000 m (6561.7′)
Overvoltage categoryAC: II, DC: I
Pollution degree2
Calculation control methodProgram storage method
I/O control methodRefresh method
Program languageExpanded ladder, KV Script, mnemonic
Number of instructionsBasic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
Instruction execution speedBasic instruction: 50 ns minimum, Application instruction: 170 ns minimum
Program capacity16k steps
Maximum number of attachable I/O units8
Maximum number of I/O points256 (excluding the base unit I/O)
Input relay/Output relay/Internal auxiliary relayTotal of 9600 points 1 bit (R000 to R59915)
Link relay8192 points 1 bit (B0 to B1FFF)
Internal auxiliary relay9600 points 1 bit (MR000 to MR59915)
Latch relay3200 points 1 bit (LR000 to LR19915)
Control relay1440 points 1 bit (CR000 to CR8915)
Timer512 points 32 bit (T0 to T511)
Counter256 points 32 bit (C0 to C255)
Data memory32768 points 16 bit (DM0 to DM32767)
Link register16384 points 16 bit (W0 to W3FFF)
Temporary memory512 points 16 bit (TM0 to TM511)
High-speed counter3 points (CTH0 to CTH2), 32-bit automatic reset counter
High-speed counter comparator6 points (CTC0 to CTC5), 32 bits, two points per high-speed counter
Index register12 points 32 bit (Z01 to Z12)
Control memory9000 points 16 bit (CM0 to CM8999)
Base unit I/OInput: 24 points, output: 16 points, Input common: 1 point, Output common: 6 points
Device comment20000 When a maximum-length ladder program is written with no labels.
Label28000 When a maximum-length ladder program is written with no device comments.
Program memoryFlash ROM can be rewritten 10000 times
DeviceNonvolatile RAM
Self-diagnosis functionCPU error, RAM error, and other problems
Relay numberGeneral input: R000 to R007, R014 to R107 (18 points)
Input mode24 VDC input (open collector)
Maximum input voltage26.4 VDC
Rated input voltage24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA)
Minimum ON voltage19 VDC
Maximum OFF current1.5 mA
Relay numberR500 to R515 (16 points)
Output modeRelay
Rated load250 VAC/30 VDC, 2 A

Thông tin bổ sung

Thương hiệu

Keyence

Yêu cầu báo giá

Hãy cho chúng tôi cơ hội được phục vụ, Quý khách vui lòng để lại thông tin của mình giúp.








    Tư vấn sản phẩm theo yêu cầu

    Lỗi: Không tìm thấy biểu mẫu liên hệ.