| Thông số | Giá trị |
|---|---|
| Model | KV-N40ATP |
| General specifications – Power voltage | 100 to 240 VAC (+10%/-15%) |
| General specifications – Operating ambient temperature | 0 to 55°C32 to 131°F(no freezing)*1*2 |
| General specifications – Operating ambient humidity | 5 to 95% RH (no condensation)*1 |
| General specifications – Operating environment | As little dust and corrosive gas as possible |
| General specifications – Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6) |
| General specifications – Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case |
| General specifications – Insulation resistance | 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case) |
| General specifications – Output power supply voltage | 24 VDC (±10%; output capacity: 0.6 A) |
| General specifications – Storage temperature | −25 to +75°C−13 to +167°F |
| General specifications – Vibration resistance – Intermittent vibration – Frequency: 5 to 9 Hz | Amplitude: 3.5 mm0.14″*3*4 |
| General specifications – Vibration resistance – Intermittent vibration – Frequency: 9 to 150 Hz | Acceleration: 9.8 m/s232.2’/s2*3*4 |
| General specifications – Vibration resistance – Continuous vibration – Frequency: 5 to 9 Hz | Amplitude: 1.75 mm0.07″*3*4 |
| General specifications – Vibration resistance – Continuous vibration – Frequency: 9 to 150 Hz | Acceleration: 4.9 m/s216.1’/s2*3*4 |
| General specifications – Shock resistance | Acceleration: 150 m/s2492.1’/s2, application time: 11 ms, three times in each of the X, Y, and Z directions |
| General specifications – Operating altitude | 2000 m6561.7′or less |
| General specifications – Overvoltage category | AC: II, DC: I |
| General specifications – Pollution degree | 2 |
| Performance specifications – Calculation control method | Program storage method |
| Performance specifications – I/O control method | Refresh method |
| Performance specifications – Program language | Expanded ladder, KV Script, mnemonic |
| Performance specifications – Number of instructions | Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions |
| Performance specifications – Instruction execution speed | Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum |
| Performance specifications – Program capacity | 16k steps |
| Performance specifications – Maximum number of attachable I/O units | 8 |
| Performance specifications – Maximum number of I/O points | 256 (excluding the base unit I/O) |
| Performance specifications – Input relay/Output relay/Internal auxiliary relay (R) | Total of 9600 points 1 bit (R000 to R59915) |
| Performance specifications – Link relay (B) | 8192 points 1 bit (B0 to B1FFF) |
| Performance specifications – Internal auxiliary relay (MR) | 9600 points 1 bit (MR000 to MR59915) |
| Performance specifications – Latch relay (LR) | 3200 points 1 bit (LR000 to LR19915) |
| Performance specifications – Control relay (CR) | 1440 points 1 bit (CR000 to CR8915) |
| Performance specifications – Timer (T) | 512 points 32 bit (T0 to T511) |
| Performance specifications – Counter (C) | 256 points 32 bit (C0 to C255) |
| Performance specifications – Data memory (DM) | 32768 points 16 bit (DM0 to DM32767) |
| Performance specifications – Link register (W) | 16384 points 16 bit (W0 to W3FFF) |
| Performance specifications – Temporary memory (TM) | 512 points 16 bit (TM0 to TM511) |
| Performance specifications – High-speed counter (CTH) | 3 points (CTH0 to CTH2), 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 50 kHz per phase difference)*6 |
| Performance specifications – High-speed counter comparator (CTC) | 6 points (CTC0 to CTC5), 32 bits, two points per high-speed counter |
| Performance specifications – Index register (Z) | 12 points 32 bit (Z01 to Z12) |
| Performance specifications – Control memory (CM) | 9000 points 16 bit (CM0 to CM8999) |
| Performance specifications – Positioning pulse output | 3 axes, Maximum output frequency: 100 kHz |
| Performance specifications – Base unit I/O | Input: 24 points, output: 16 points, Input common: 1 point, Output common: 2 points |
| Performance specifications – Number of comments and labels – Device comment | 20000 (when a maximum-length ladder program is written with no labels) |
| Performance specifications – Number of comments and labels – Label | 28000 (when a maximum-length ladder program is written with no device comments) |
| Performance specifications – Power off hold function – Program memory | Flash ROM can be rewritten 10000 times |
| Performance specifications – Power off hold function – Device | Nonvolatile RAM*7 |
| Performance specifications – Self-diagnosis function | CPU error, RAM error, and other problems |
| Input specifications – Relay number | General input: R000 to R007, R014 to R107 (18 points), High-speed A-phase and B-phase input: R008 to R013 (3 channels, 6 points in total) |
| Input specifications – Input mode | 24 VDC input (open collector) |
| Input specifications – Maximum input voltage | 26.4 VDC |
| Input specifications – Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA*8) |
| Input specifications – Minimum ON voltage | 19 VDC |
| Input specifications – Maximum OFF current | 1.5 mA |
| Input specifications – Common method | General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input) |
| Input specifications – Circuit delay time | General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs); High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9 |
| Input specifications – Input time constant | Normal: 10 ms, When the HSP instruction is used: 10 μs, When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9 |
| Input specifications – Response frequency | High-speed A-phase and B-phase input: Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50% |
| Output specifications – Relay number | General output: R506 to R515 (10 points), High-speed output: R500 to R505 (6 points) |
| Output specifications – Output mode | MOSFET*10 |
| Output specifications – Rated load | 30 VDC, 0.5 A |
| Output specifications – Maximum OFF voltage | 30 VDC |
| Output specifications – Leakage current at OFF | 100 μA or less |
| Output specifications – Residual voltage at ON | 0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output) |
| Output specifications – Common method | 8 to 10 points/1 common |
| Output specifications – ON/OFF response time | General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more); High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load) |
| Output specifications – Overcurrent protection | Protection provided for each common*11 |
| Output specifications – Output frequency | High-speed output: 100 kHz (7 to 100 mA load) |
| Built-in serial port – Interface – Communication standard | RS-232C |
| Built-in serial port – Interface – Connection | Modular connector |
| Built-in serial port – Transmission specifications RS-232C – Baud rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Built-in serial port – Transmission specifications RS-232C – Transmission method | Full duplex |
| Built-in serial port – Transmission specifications RS-232C – Data format – Start bit | 1 bit |
| Built-in serial port – Transmission specifications RS-232C – Data format – Data bits | 7 bits, 8 bits |
| Built-in serial port – Transmission specifications RS-232C – Data format – Stop bits | 1 bit, 2 bits |
| Built-in serial port – Transmission specifications RS-232C – Error detection – Parity | Even, odd, none |
| Built-in serial port – Transmission specifications RS-232C – Transmission distance | 15 m49.2′ |
| Built-in serial port – Transmission specifications RS-232C – Number of transmission units | 1 |
| Built-in serial port – Indication | SD (green), RD (red) |
| Internal current consumption | 82 VA |
| Weight | Approx. 620 g |
PLC Keyence KV-N40ATP (24 in/ 16 out transistor)
SKU: KV-N40ATP
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
5.500.000 ₫
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
PLC Keyence
-
Module Keyence KV-NC16EXE (16 ngõ vào)
4.100.000 ₫ -
Module Keyence KV-N16ETP (16 ngõ ra transistor)
4.100.000 ₫ -
Module Keyence KV-N16ER (16 ngõ ra relay)
4.100.000 ₫ -
Module bộ đếm Keyence KV-SC20
-
PLC Keyence KV-24DR (16 in/ 8 out relay)
4.900.000 ₫ -
Module Keyence KL-32CX
-
Module Keyence KV-N8ET (8 ngõ ra transistor)
3.700.000 ₫ -
Module Keyence KV-MX1
7.500.000 ₫ -
PLC Keyence KV-N40DT (24 in/ 16 out transistor)
5.500.000 ₫ -
Module EtherNet Keyence KV-XLE02 2 ports
3.500.000 ₫