Name: PLC Keyence KV-N14DR (8 in/ 6 out relay)
Brand: Keyence
SKU: KV-N14DR
Availability: InStock

PLC Keyence KV-N14DR (8 in/ 6 out relay)

SKU: KV-N14DR
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng

4.200.000 ₫

SKU: KV-N14DR Danh mục: PLC Keyence Thương hiệu: Keyence

Thông số	Giá trị
Model	KV-N14DR
Power voltage	24 VDC (+10%/-15%)
Operating ambient temperature	0 to 55°C (32 to 131°F) (no freezing)
Operating ambient humidity	5 to 95% RH (no condensation)
Operating environment	As little dust and corrosive gas as possible
Noise immunity	1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (IEC standard compliant)
Withstand voltage	1500 VAC for 1 minute, between power supply terminal and I/O terminals
Insulation resistance	50 MΩ or more (500 VDC megger used to perform measurements)
Output power supply voltage	−
Storage temperature	−25 to +75°C (−13 to +167°F)
Intermittent vibration (Frequency: 5 to 9 Hz)	Amplitude: 3.5 mm (0.14″)
Intermittent vibration (Frequency: 9 to 150 Hz)	Acceleration: 9.8 m/s² (32.2’/s²)
Continuous vibration (Frequency: 5 to 9 Hz)	Amplitude: 1.75 mm (0.07″)
Continuous vibration (Frequency: 9 to 150 Hz)	Acceleration: 4.9 m/s² (16.1’/s²)
Shock resistance	Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms
Operating altitude	2000 m (6561.7′) or less
Overvoltage category	AC: II, DC: I
Pollution degree	2
Calculation control method	Program storage method
I/O control method	Refresh method
Program language	Expanded ladder, KV Script, mnemonic
Number of instructions	335 types and 690 instructions
Instruction execution speed	Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
Program capacity	8k steps
Maximum number of attachable I/O units	3
Maximum number of I/O points	128 (excluding the base unit I/O)
Relay number	General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
Input mode	24 VDC input (open collector)
Maximum input voltage	26.4 VDC
Rated input voltage	24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA)
Minimum ON voltage	19 VDC
Maximum OFF current	1.5 mA
Output mode	Relay
Rated load	250 VAC/30 VDC, 2 A
Relay life	Electrical: 100000 cycles or more (20 cycles/minute), Mechanical: 20000000 cycles or more
Relay replacement	Impossible
Communication standard	RS-232C
Baud rate	1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Transmission method	Full duplex
Transmission distance	15 m (49.2′)
Weight	Approx. 350 g