PLC Keyence KV-N14ATP (8 in/ 6 out transistor)

SKU: KV-N14ATP
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng

4.200.000 

Báo giá
SKU: KV-N14ATP Danh mục: Thương hiệu:
Thông số Giá trị
Model KV-N14ATP
Power voltage 100 to 240 VAC (+10%/-15%)
Operating ambient temperature 0 to 55°C (32 to 131°F) (no freezing)
Operating ambient humidity 5 to 95%RH (no condensation)
Operating environment As little dust and corrosive gas as possible
Noise immunity 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
Withstand voltage 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
Insulation resistance 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
Output power supply voltage 24 VDC (±10%; output capacity : 0.6 A)
Storage temperature −25 to +75°C (−13 to +167°F)
Intermittent vibration – Frequency: 5 to 9 Hz Amplitude: 3.5 mm (0.14″)
Intermittent vibration – Frequency: 9 to 150 Hz Acceleration: 9.8 m/s² (32.2’/s²)
Continuous vibration – Frequency: 5 to 9 Hz Amplitude: 1.75 mm (0.07″)
Continuous vibration – Frequency: 9 to 150 Hz Acceleration: 4.9 m/s² (16.1’/s²)
Shock resistance Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each of the X, Y, and Z directions
Operating altitude 2000 m (6561.7′)
Overvoltage category AC: II, DC: I
Pollution degree 2
Program capacity 8k steps
Maximum number of attachable I/O units 3
Maximum number of I/O points 128 (excluding the base unit I/O)
Input relay/Output relay/Internal auxiliary relay Total of 9600 points 1 bit (R000 to R59915)
High-speed counter 2 points (CTH0 to CTH1), 32-bit automatic reset counter (Input response: 100 kHz per single phase, 50 kHz per phase difference)
High-speed counter comparator 4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter
Positioning pulse output 2 axes, Maximum output frequency: 100 kHz
Base unit I/O Input: 8 points, output: 6 points, Input common: 1 point, Output common: 1 point
Device comment 10000 When a maximum-length ladder program is written with no labels
Label 14000 When a maximum-length ladder program is written with no device comments
Power off hold function – Program memory Flash ROM can be rewritten 10000 times
Power off hold function – Device Nonvolatile RAM
Self-diagnosis function CPU error, RAM error, and other problems
Relay number (Input) General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
Input mode 24 VDC input (open collector)
Maximum input voltage 26.4 VDC
Rated input voltage 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA)
Minimum ON voltage 19 VDC
Maximum OFF current 1.5 mA
Common method General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
Relay number (Output) General output: R504 to R505 (2 points), High-speed output: R500 to R503 (4 points)
Output mode MOSFET
Rated load 30 VDC, 0.5 A
Weight Approx. 420 g

Thông tin bổ sung

Thương hiệu

Keyence

Yêu cầu báo giá

Hãy cho chúng tôi cơ hội được phục vụ, Quý khách vui lòng để lại thông tin của mình giúp.








    Tư vấn sản phẩm theo yêu cầu

    Lỗi: Không tìm thấy biểu mẫu liên hệ.