| Thông số | Giá trị |
|---|---|
| Model | KV-N14AT |
| Power voltage | 100 to 240 VAC (+10%/-15%) |
| Operating ambient temperature | 0 to 55°C (32 to 131°F) (no freezing) |
| Operating ambient humidity | 5 to 95%RH (no condensation) |
| Operating environment | As little dust and corrosive gas as possible |
| Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6) |
| Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case |
| Insulation resistance | 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case) |
| Output power supply voltage | 24 VDC (±10%; output capacity: 0.6 A) |
| Storage temperature | −25 to +75°C (−13 to +167°F) |
| Vibration resistance (Intermittent vibration) | Frequency: 5 to 9 Hz, Amplitude: 3.5 mm (0.14″) |
| Vibration resistance (Continuous vibration) | Frequency: 5 to 9 Hz, Amplitude: 1.75 mm (0.07″) |
| Shock resistance | Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each of the X, Y, and Z directions |
| Operating altitude | 2000 m (6561.7′) |
| Overvoltage category | AC: II, DC: I |
| Pollution degree | 2 |
| Program language | Expanded ladder, KV Script, mnemonic |
| Number of instructions | Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions |
| Program capacity | 8k steps |
| Maximum number of I/O units | 3 |
| Maximum number of I/O points | 128 (excluding the base unit I/O) |
| Relay number (R) | Total of 9600 points 1 bit (R000 to R59915) |
| Relay number (B) | 8192 points 1 bit (B0 to B1FFF) |
| Relay number (MR) | 9600 points 1 bit (MR000 to MR59915) |
| Timer (T) | 512 points 32 bit (T0 to T511) |
| Counter (C) | 256 points 32 bit (C0 to C255) |
| Data memory (DM) | 32768 points 16 bit (DM0 to DM32767) |
| Base unit I/O | Input: 8 points, output: 6 points, Input common: 1 point, Output common: 1 point |
| Power off hold function (Program memory) | Flash ROM can be rewritten 10000 times |
| Power off hold function (Device) | Nonvolatile RAM |
| Self-diagnosis function | CPU error, RAM error, and other problems |
| Input specifications (Relay number) | General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total) |
| Input mode | 24 VDC input (open collector) |
| Maximum input voltage | 26.4 VDC |
| Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA) |
| Input time constant | Normal: 10 ms, When the HSP instruction is used: 10 μs |
| Output specifications (Relay number) | General output: R504 to R505 (2 points), High-speed output: R500 to R503 (4 points) |
| Output mode | MOSFET |
| Rated load | 30 VDC, 0.5 A |
| Output frequency | High-speed output: 100 kHz (7 to 100 mA load) |
| Built-in serial port (Interface) | RS-232C |
| Built-in serial port (Connection) | Modular connector |
| Transmission specifications RS-232C (Baud rate) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Transmission specifications RS-232C (Transmission method) | Full duplex |
| Transmission specifications RS-232C (Error detection) | Parity (Even, odd, none) |
| Transmission specifications RS-232C (Transmission distance) | 15 m (49.2′) |
| Internal current consumption | 75 VA (The VA values are calculated with a power factor of 30%) |
| Weight | Approx. 420 g |
PLC Keyence KV-N14AT (8 in/ 6 out transistor)
SKU: KV-N14AT
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
4.200.000 ₫
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|









