| Thông số | Giá trị |
|---|---|
| Model | KL-LC1 |
| Measurement type | Load cell |
| Power voltage | 24 VDC ± 10%, Class 2 |
| Operating ambient temperature | 0 to +50°C (no freezing) |
| Operating ambient humidity | 35 to 85%RH(no condensation) |
| Ambient temperature for storage | -20 to +70°C |
| Operating environment | Minimal amount of dust and corrosive gas present |
| Measurement category | – |
| Wire temperature rating | +60°C or more |
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000-4-2/-3/-4/-6) |
| Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and each terminal and between all the terminals and the case) |
| Insulation resistance | 100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and each I/O terminal and between all the terminals and the case) |
| Internal current consumption (excluding current for driving input circuits) | 230mA or less |
| Shock resistance | Conforms to JIS B 3502 and IEC 61131-2, 147 m/s², operating time: 11 ms, 3 times in each of the 3 directions |
| Pollution degree | 2 |
| Vibration resistance (Intermittent vibration: Frequency: 10 to 57 Hz, Amplitude: 0.075 mm) | Frequency: 57 to 150 Hz, Acceleration: 9.8 m/s² |
| Vibration resistance (Continuous vibration: Frequency: 10 to 57 Hz, Amplitude: 0.035 mm) | Frequency: 57 to 150 Hz, Acceleration: 4.9 m/s² |
| Weight | approx 350g |
| Number of channels | 1CH |
| Number of ranges | 4 |
| Range switching | Setting: Use the setting switch. |
| Sampling rate | 1 ms (1,000 times/sec.) |
| Input range | Range 1: 0.5 mV/V, Range 2: 1.0 mV/V, Range 3: 2.0 mV/V, Range 4: 3.0 mV/V |
| Resolution (5V, Range 1: 0.5 mV/V) | 0.5 µV, 1/10000 |
| Linearity (0 to 50°C) | ±0.2% of F.S. ± 1 digit |
| Zero-drift (0 to 50°C) | ±0.4% of F.S. ± 1 digit |
| Control input | 2 (Parameters are used to switch between the KL input, peak/bottom hold control input, and 0-point adjustment input.) |
| Control output | 2 transistor (NPN open-collector) outputs (Parameters are used to switch between the KL output and comparator output.) |
| Setting data | Recorded to the EEPROM (rewritable 1,000,000 times) |
| Compatible sensor | 350 Ω |
| External calibration input signal | 2 inputs |
| Maximum input voltage | DC26.4V |
| Control output (Transistor NPN output) | Rated load: DC30V 0.1A |
| KL link specifications | Model: KL-N20V, supported PLC: KEYENCE KV-1000/700; model: KL-N10V, supported PLC: KEYENCE KV-10/16/24/40 |
Module Keyence KL-LC1
SKU: KL-LC1
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
PLC Keyence
-
Module Keyence KV-NC16ET (16 ngõ ra transistor)
3.400.000 ₫ -
PLC Keyence KV-N40DTP (24 in/ 16 out transistor)
5.500.000 ₫ -
PLC Keyence KV-40DR (24 in/ 16 out relay)
7.500.000 ₫ -
Module Keyence KV-SAD04
-
PLC Keyence KV-24AT (16 in/ 8 out transistor)
4.500.000 ₫ -
PLC Keyence KV-10DT (6 in/ 4 out transistor)
3.500.000 ₫ -
Module Keyence KV-NC16EXT (16 in/ 16 out transistor)
3.900.000 ₫ -
Module Keyence KV-H20S
-
Module Keyence KV-NC32EX (32 ngõ vào)
3.700.000 ₫ -
Module Keyence KV-H20