| Thông số | Giá trị |
|---|---|
| Model | KL-DC1V |
| Measurement type | DC voltage |
| Power voltage | 24 VDC ± 10%, Class 2 |
| Operating ambient temperature | 0 to +50°C (no freezing) |
| Operating ambient humidity | 35 to 85%RH(no condensation) |
| Ambient temperature for storage | -20 to +70°C |
| Operating environment | Minimal amount of dust and corrosive gas present |
| Measurement category | III |
| Wire temperature rating | +60°C or more |
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000-4-2/-3/-4/-6) |
| Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and each terminal and between all the terminals and the case) |
| Insulation resistance | 100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and each I/O terminal and between all the terminals and the case) |
| Internal current consumption | 170mA or less |
| Shock resistance | Conforms to JIS B 3502 and IEC 61131-2, 147 m/s², operating time: 11 ms, 3 times in each of the 3 directions |
| Pollution degree | 2 |
| Intermittent vibration frequency (10 to 57 Hz) | Amplitude: 0.075 mm |
| Intermittent vibration frequency (57 to 150 Hz) | Acceleration: 9.8 m/s² |
| Continuous vibration frequency (10 to 57 Hz) | Amplitude: 0.035 mm |
| Continuous vibration frequency (57 to 150 Hz) | Acceleration: 4.9 m/s² |
| Weight | approx 350g |
| Number of channels | 1CH |
| Number of ranges | 3 |
| Range switching | Setting: Use the setting switch. Connection: The connection terminal varies depending on the range. |
| Input method | Single-ended |
| Sampling rate (Normal mode) | 1 ms (1,000 times/sec.) |
| Sampling rate (High-precision mode) | 100 ms (10 times/sec.) |
| Input range | Range 1: 0 to 10 V, range 2: ±10 V, range 3: ±100 V |
| Displayable range (Range 1: 0 to 20 mA) | 0.000 to 10.999V |
| Displayable range (Range 2: ±10 mA) | -10.999 to 10.999V |
| Displayable range (Range 3: ±100 mA) | -109.99 to 109.99V |
| Resolution (Normal mode, Range 1: 0 to 20 mA) | 1 mV (0.001 V; 1/10000) |
| Resolution (Normal mode, Range 2: ±10 mA) | 1mV(0.001V)1/20000 |
| Resolution (Normal mode, Range 3: ±100 mA) | 10mV(0.01V)1/20000 |
| Resolution (High accuracy, Range 1: 0 to 20 mA) | 100 µV (0.1 mV; 1/100000) |
| Resolution (High accuracy, Range 2: ±10 mA) | 100 µV (0.1 mV; 1/200000) |
| Resolution (High accuracy, Range 3: ±100 mA) | 1mV(0.001V)1/200000 |
| Input impedance (Range 1: 0 to 20 mA) | 1 MΩ |
| Input impedance (Range 2: ±10 mA) | 1 MΩ |
| Input impedance (Range 3: ±100 mA) | 4 MΩ |
| Absolute maximum input current (Range 1: 0 to 20 mA) | ±100 V |
| Absolute maximum input current (Range 2: ±10 mA) | ±100 V |
| Absolute maximum input current (Range 3: ±100 mA) | ±150 V |
| Measurement accuracy (25 ±5°C, Range 1: 0 to 20 mA) | ±0.1% of F.S. ± 1 digit |
| Measurement accuracy (25 ±5°C, Range 2: ±10 mA) | ±0.1% of F.S. ± 1 digit |
| Measurement accuracy (25 ±5°C, Range 3: ±100 mA) | ±0.2% of F.S. ± 1 digit |
| Measurement accuracy (0 to 50°C, Range 1: 0 to 20 mA) | ±0.5% of F.S. ± 1 digit |
| Measurement accuracy (0 to 50°C, Range 2: ±10 mA) | ±0.5% of F.S. ± 1 digit |
| Measurement accuracy (0 to 50°C, Range 3: ±100 mA) | ±0.6% of F.S. ± 1 digit |
| Control input | 2 (Parameters are used to switch between the KL input, peak/bottom hold control input, and 0-point adjustment input.) |
| Control output | 2 transistor (NPN open-collector) outputs (Parameters are used to switch between the KL output and comparator output.) |
| Setting data | Recorded to the EEPROM (rewritable 1,000,000 times) |
| Other functions | Hold (peak and bottom), 0-point adjustment, comparator output, filter setting (LPF and HPF), time average (simple and moving), scaling setting, display unit changing, lock |
| Number of external calibration input signals | 2 |
| Maximum input voltage (calibration input) | DC26.4V |
| Rated voltage (calibration input) | DC24V 5.3mA |
| Minimum ON voltage (calibration input) | 19V |
| Maximum OFF current (calibration input) | 1.5mA |
| Common ground (calibration input) | 2/common |
| Control output number | 2 |
| Control output (type) | Transistor NPN output |
| Rated load (control output) | DC30V 0.1A |
| Peak load current (control output) | 0.2A |
| Leakage current (control output at OFF) | 100 µA or less |
| Residual voltage (control output at ON) | DC0.8V or less |
| Common ground (control output) | 2/common |
| ON/OFF response time | Off to on: 10 µs or less, on to off: 50 µs or less |
Module Keyence KL-DC1V
SKU: KL-DC1V
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Báo giá
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo 
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
PLC Keyence
-
Module truyền thông Keyence KV-L20V
3.800.000 ₫ -
PLC Keyence KV-N24AT (14 in/ 10 out transistor)
4.500.000 ₫ -
Module truyền thông Keyence KV-L21V
2.700.000 ₫ -
Module truyền động Keyence KV-XH16EC 16 vị trí
-
Bộ chia mạng Keyence NE-Q05
-
Module Keyence KV-NC20L RS-232C/422A/485
-
CC-link Module Keyence KV-RC4AD 4 ngõ vào
-
PLC Keyence KV-N40DT (24 in/ 16 out transistor)
5.500.000 ₫ -
PLC Keyence KV-10DTP (6 in/ 4 out transistor)
3.500.000 ₫ -
Module Keyence KV-NC2DA
3.600.000 ₫