| Thông số | Giá trị |
|---|---|
| Model | KL-8BLX |
| Disconnection Error Output Load | 30 VDC, 0.1 A or less, residual voltage: 1 V or less |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail |
| Insulation System | Photocoupler isolation |
| Power Voltage | 10.8 to 26.4 VDC (for the connector type I/O unit, supplied by the dedicated cable) |
| Operating Ambient Temperature | 0 to 60°C |
| Operating Ambient Humidity | 35 to 85%RH (no condensation) |
| Operating Environment | No corrosive gas present |
| Noise Immunity | Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (via a noise simulator) |
| Withstand Voltage | 500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal) |
| Insulation Resistance | 20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the input terminals; excluding the ERR output terminal) |
| Input Maximum Rating | DC 26.4V |
| Input Voltage | 24 VDC, 5.3 mA (24 V mode); 5 VDC, 0.9 mA (5 V mode) |
| Minimum ON Voltage | 19 V (24 V mode), 2.5 V (5 V mode) |
| Maximum OFF Current | 2 mA (24 V mode) |
| Maximum OFF Voltage | 0.8 V (5 V mode) |
| Input Impedance | 4.3 kΩ |
| Number of Inputs/Outputs | 8, terminal block DC input |
| Internal Current Consumption | 80mA or less |
| Weight | Approx. 130g |
| Output Specifications | – |
| Output Type | Transistor output |
| Relay Output Rated Voltage | – |
| Rated Output Current | – |
| Common Ground | – |
| ON Resistance | – |
| ON Delay Time | – |
| OFF Delay Time | – |
| Insulation Resistance | – |
| Insulation System | – |
Module Keyence KL-8BLX
SKU: KL-8BLX
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|









