Thông số | Giá trị |
---|---|
Model | KL-8BLR |
Disconnection Error Output Load | 30 VDC, 0.1 A or less, residual voltage: 1 V or less |
Vibration Resistance | 10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail |
Insulation System | – |
Power Voltage | 10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable) |
Operating Ambient Temperature | 0 to 60°C |
Operating Ambient Humidity | 35 to 85%RH (no condensation) |
Operating Environment | No corrosive gas present |
Noise Immunity | Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (via a noise simulator) |
Withstand Voltage | 500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal) |
Insulation Resistance | – |
Input Maximum Rating | – |
Input Voltage | – |
Minimum ON Voltage | – |
Maximum OFF Current | – |
Maximum OFF Voltage | – |
Input Impedance | – |
Number of Inputs/Outputs | 8-terminal terminal block relay output |
Internal Current Consumption | 170mA or less |
Weight | Approx. 160g |
Output Specifications | – |
Residual Voltage (when output is ON) | – |
Leakage Current (when output is OFF) | – |
Transistor Output | – |
Relay Output Rated Voltage | AC250V/DC30V |
Relay Output Rated Current | 2 A/output (inductive load), 4 A/output (resistive load), 4 A/all commons |
Common Ground | Written on the terminal wiring diagram of each unit |
ON Resistance | 50 mΩ or less |
ON Delay Time | 10ms or less |
OFF Delay Time | 10ms or less |
Insulation Resistance | 20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal) |
Insulation System | Relay isolation |
Module Keyence KL-8BLR
SKU: KL-8BLR
Hãng sản xuất: Keyence
Công nghệ: Nhật Bản
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Báo giá
Thông tin bổ sung
Thương hiệu | Keyence |
---|