Name: Module chuyển động Keyence KV-MC40V 4 vị trí
Brand: Keyence
SKU: KV-MC40V
Availability: InStock

Thông số	Giá trị
Model	KV-MC40V
Type	Positioning/Motion unit
Number of control axes	4 axes + 1 axis (virtual axis)
Built-in device	Relay: 1280 points (80 ch), Data memory: 90 words (high speed) / 582 words (simple)
Output format	Differential line driver output (switchable among 1-pulse method, 2-pulse method, and A/B-phase method)
Connectable CPU units	KV-5500/5000/3000
Max. output pulse	4 MHz
Control mode	Position control
Control period	1.0 ms
External interface	Input: Photocoupler input, Output: Open collector output (30 VDC 50 mA)
Input time constant	Each input is set in 11 stages for each block
Axis control function execution method	Ladder program, motion flow
Motion flow	Program capacity: 768 KB, Max. number of blocks: 256 blocks, Max. number of flows: 32
Position unit	mm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available
Cumulative address	-2,147,483,648 to +2,147,483,647 instruction units
Positioning mode	Absolute value/relative value
Position setting range	-2,147,483,648 to +2,147,483,647 instruction units
Interpolation	Straight-line interpolation (up to 16 axes), arc interpolation, helical interpolation
Acceleration/deceleration curve	Straight-line, SIN, Bezier
Acceleration/deceleration time	0 to 65,535 ms
Start-up time	Independent: 500 to 600 µs, Interpolation (straight-line 2 axes): 600 to 700 µs, Interpolation (arc 2 axes): 700 to 800 µs
M-code	1 to 65,000, WITH/AFTER mode
Sensor positioning	External input – based switching control from speed to position
Number of points	800 points/axis
Synchronisation control	Input: Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only)
Clutch	Select from direct, slide, and follow-up
Cam	Resolution: 2,048 to 32,768, Amount of data: 4 to 64 (Number changes according to the resolution)
Contact output	16 points (including 8 external output points) × 2
Correction during operation	Correction via auxiliary input, phase correction, and lead angle correction
Fine control	Fine data work area: 8 MB, Built-in ROM capacity: 512 KB, Number of settings: Built-in ROM: 100, SD memory card: 1000
Origin return	Origin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected), data set type, no limit switch
Speed control	Speed instruction range: –
Torque control	Torque instruction range: –
JOG/inching	Inching (The number of pulses can be specified), JOG (high speed/low speed)
Teaching	Current coordinate teaching and teaching from the counter current value are supported
Memory data	Point parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions)
High-speed counter	When KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication)
5-V power output	5 V ±5%, Max. 100 mA (total value)
Output display	Error status/Pulse output status
Self-diagnosis function	Diagnosis can be made through hardware error, various parameter errors, error number, and error messages
Parameter setting	Parameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs
Data backup	Coordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching
Internal current consumption	Main unit: 180 mA or less, external I/O: 130 mA or less
Weight	Approx. 225 g

Thông tin bổ sung

Thương hiệu	Keyence

Module chuyển động Keyence KV-MC40V 4 vị trí

Thông tin bổ sung

Khu vực Miền Nam

Khu vực Miền Bắc

Khu vực Miền Trung

Yêu cầu báo giá

Tư vấn sản phẩm theo yêu cầu

PLC Keyence

Module Keyence KL-DC1A

Module Keyence KV-B16TCP (16 ngõ ra transistor)

Module truyền động Keyence KV-ML16V 16 vị trí

Module Keyence KV-NC16ET (16 ngõ ra transistor)

Module Keyence KV-AD40G

Module Keyence KV-E16X (16 ngõ vào)

Module Keyence KV-C32XC (32 ngõ vào)

Module Keyence KV-E4X (4 ngõ vào)

Module nhiệt độ Keyence KV-TF40

Module Keyence KL-8BLT (8 ngõ ra transistor)