Cảm biến lưu lượng Keyence FD-MZ10AYKP

Thông số	Giá trị
Model	FD-MZ10AYKP*1
Type	Horizontal
Shape	Built-in amplifier
Rated flow range	0.14 – 2.60 G/min (0.50 – 10 L/min)*1
Possible display range	0.14 – 6.35 G/min (0.50 – 30 L/min)*2
Possible ranges to set	0 – 6.35 G/min (0 – 30 L/min)
Connection port	NPT3/8 (10 A)
Detectable fluids	Water or non-corrosive liquid
Conductivity of detection fluids	5 µS/cm or higher
Detection fluid temperature	0 to +85°C32 to 185 °F(No freezing)
Pressure loss	Max. 1.45 PSI (0.01 MPa)
Display method	Dual row display with 4-digit, 7 segment LED, bar display (2 colors), output indicators, flow indicator
Display resolution	0.01/0.1 (G/min, L/min) selectable
Repeatability	0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of F.S.*3
Hysteresis	Variable
Response time (chatter prevention feature)	0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit	0.01/0.1/1/10/100 (G, L) selectable
Integration data storage cycle	Save to memory every 10 seconds
Memory backup	EEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more)
Control output/Accumulation pulse output/ Error alarm output	PNP open collector, max. 100 mA/ch*430 V or less,residual voltage 1 V or less, 3 outputs (N.O./N.C. switchable)
Analog output	4-20 mA, max. load resistance 260 Ω Analog output range can be set to any value
Integration reset/bank switch input/flow zero function input	Input time : 20 ms or greater,Select either the accumulation output or the accumulation pulse by setting the mode
Minimum flow volume	0.14 G/min (0.50 L/min)*5
Power consumption (Current consumption)	Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
Rating – Power voltage	24 VDC, Ripple (P-P) 10 % or less, Class 2
Environmental resistance – Enclosure rating	IP65
Pressure resistance	290 PSI (2.0 MPa)
Applied pressure range	Max. 145 PSI (1.0 MPa)
Ambient temperature	0 to +50 °C32 to 122 °F(No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06″, 2 hours in each of the X, Y, and Z directions
Material – Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Other materials	Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
Accessory	Instruction Manual, Connector cable (2.7 m106.3″)
Weight	Approx. 865 g

Thông tin bổ sung

Thương hiệu	Keyence
Loại	Cảm biến lưu lượng

Cảm biến lưu lượng Keyence FD-MZ10AYKP

Thông tin bổ sung

Khu vực Miền Nam

Khu vực Miền Bắc

Khu vực Miền Trung

Yêu cầu báo giá

Tư vấn sản phẩm theo yêu cầu

Cảm biến Keyence

Bộ khuếch đại cảm biến Keyence FS-N44P

Cảm biến quang PW Keyence PW-51

Cảm biến áp suất Keyence GP-M010

Cảm biến sợi quang Keyence FU-38K

Cảm biến sợi quang Keyence FU-75F

Cảm biến tiệm cận Keyence EH-305S

Cảm biến va đập Keyence GH-313A(50M)

Cảm biến sợi quang Keyence FU-R6F

Cảm biến quang Keyence PZ-G52CP

Cảm biến an toàn Keyence GL-R36HG